i2Systems LightLink Dimming Module

i2Systems LightLink dimming module allows you to control your light's output with a regular push-button switch. One LightLink module controls up to 20 fixtures, while being small enough to fit in most switch boxes.

Press and hold the momentary switch to initiate the dimming cycle. The dimming cycle will continue as long as the switch is engaged, ranging from 100% to approximately 5% intensity, pausing briefly for two seconds at each position before dimming in the opposite direction. Briefly pressing the momentary switch provides regular on/off functionality. After being turned off, the LightLink module will return the lights back to 100% the next time they are turned on.

This module is compatible with the following i2Systems fixtures:

- Aperion A1110
- Apeiron A2162
- Ember E1150
- Profile P1100
- S-Line S1200